The TD1168 high-altitude test clamp for power maintenance is a special tool for temporary wiring during testing or maintenance of power equipment. It transfers traditional high-altitude work to the ground, reducing labor intensity and danger for operators while improving work efficiency, making it an ideal special wiring tool for field wiring test personnel.
Main features:
(1) Simple operation: Use the special operating rod to hook the clamp mouth of the wiring clamp onto the wiring position. By pushing and pulling the special operating rod, the clamp mouth can freely open and close to complete the wiring work. The clamp mouth has a large opening size (70mm) and is equipped with a hooking guide mechanism for convenient operation.
(2) Strong clamping force: The upper and lower clamp mouths utilize the principle of movable pulley force saving, so a smaller pulling force can achieve a larger clamping force.
(3) The wiring clamp has a built-in clamping force locking and release device. When pulling the special operating rod, the spring energy storage device inside the clamp can automatically lock the clamp mouth at any required clamping force. When pushing the special operating rod, the release device inside the clamp can open the clamped clamp mouth. If the special operating rod is not manually pushed, the self-locking device inside the clamp will never allow the clamped clamp mouth to open by itself, ensuring safety and reliability.
(4) Good contact: While clamping, it has the function of overcoming oxidation, ensuring good contact between the clamp mouth and the wiring position of the DT1168 high-altitude test clamp for power maintenance.
(5) Strong overload capacity: Short-time current is greater than 100A.
(6) Strong practicality: The clamp mouth angle of the wiring clamp can be changed, allowing wiring work for test or maintenance grounding at different angles, thicknesses, diameters, and heights below 8 meters. Light weight, easy to use. Reasonable structural design, fine quality, durable, clamp head weight less than 700 grams.
|
High-altitude test clamp configuration details |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Usage method:
It consists of two parts: the test clamp handle (the short section at the head) and the extended telescopic rod. Connect the test clamp handle to the telescopic rod by threading and tighten to make them integrated, then pull out each section of the telescopic rod, and position according to the prompts on the rod and the spring head installed on the rod into the positioning hole. The operator can directly operate on the ground, lift the installed high-altitude test clamp (including connecting test wires, etc.) (length can be arbitrary). Hook the upper clamp mouth onto the object to be tested, pull the operating rod down with force, and the clamp mouth will automatically lock and hold the object. Conversely, gently push to release. This tool is convenient to use and test.
Note: The above information and technical parameters are compiled and released by Yangzhou Dare Electric Co., Ltd.
.jpg)
