1. Copper conductor: 7×0.50, 19×0.32, 19×0.41
2. Conductive plastic layer: Ordinary PTC, Flame-retardant PTC, Fluorine-containing PTC
3. Insulation layer: Modified polyolefin, Flame-retardant polyolefin, Fluorine-containing polyolefin, Perfluorinated material
4. Shielding layer: Tinned soft round copper wire, coverage density 80%
5. Sheath layer: Modified polyolefin, Flame-retardant polyolefin, Fluorine-containing polyolefin, Perfluorinated material
3. Installation temperature: Minimum: -5℃
4. Thermal stability: After 300 cycles between 15℃ and 99℃, the
cable heating output remains above 90%.
5. Bending radius: 25.4mm at 20℃ room temperature, 35.0mm at -30℃ low temperature
6. Insulation resistance: For a cable length of 100m at an ambient temperature of 75℃, when tested with a 2,500VDC megger for 1 minute, the minimum insulation resistance (between conductor and shield) is 120MΩ.
7. Starting current (10℃): 0.4A per meter
8. For installation and use, please refer to the precautions section
9. Maximum usable length: not exceeding 100 meters
