Product Details

Explosion-proof Electric Heating Plate|Explosion-proof Heating Plate

1. Features and Applications

    The main feature of this series of explosion-proof temperature-controlled heaters is that they are suitable for heating in environments with water and high humidity. They are mainly used for winter insulation in explosive hazardous areas and high-humidity environments. This product is a full cast aluminum alloy finned heater with low design power load and large heat dissipation area. It has dual temperature protection devices.

    The explosion-proof performance of this series of heaters complies with GB3836.1—2000 "Electrical Equipment for Explosive Gas Atmospheres Part 1: General Requirements" and GB3836.2—2000 "Electrical Equipment for Explosive Gas Atmospheres Part 2: Flameproof Enclosure "d"". The explosion-proof type is flameproof, with explosion-proof mark ExdIIBT3. It has been reviewed and tested by the national designated explosion-proof inspection unit for drawings, technical documents, and samples, and has obtained the product explosion-proof certificate.

2. Equipment Performance Parameters and Model, Explosion-proof Mark Meaning:

2.1 Performance Parameters and Technical Indicators

   Equipment Power Supply Voltage: 110/220/380VAC

   Equipment Insulation Resistance: ≥10MΩ

   Equipment Insulation Strength: 1500V

   Temperature Protector Set Temperature: Inside heating plate 160℃; Heating plate surface 195℃.

   Equipment Explosion-proof Mark: ExdIIBT3

   Enclosed Heating Standard Usable Space: 15m³/kW

   Heating Equivalent: 860 kcal/kWh

   Continuous Working Time: ≥5000 hours

   Power Frequency Impulse Voltage: 2000V/1min

   Enclosure Protection Level: IP55

2.2 Product Model and Its Explosion-proof Mark Meaning are Specified as Follows:

    Example: SBwk-3-□

    SBwk——Product Code    3——Design Number

    □——Rated Power

    ExdIIBT3

    Ex——Explosion-proof Mark    d——Flameproof Type

    IIB——Explosive Mixture Level    T3——Maximum Surface Temperature Group

Waterproof, Explosion-proof Heating Product Series

SBWK-3- Type (Waterproof) Heater Dimensions: 600mm×300mm×85mm Power: 1000W-2000W/unit Voltage: 220V±10%     SBWK-3- Type (Waterproof) Heater Dimensions: 600mm×300mm×70mm Power: 1000W-3000W/unit Voltage: 220V±10%     SBWK-3-3 Type (Waterproof) Heater Dimensions: 600mm×380mm×85mm Power: 3000W/unit Voltage: 220V±10%     SBWK-3-(1-3) Type (Explosion-proof) Heater Dimensions: 600mm×(300-380)mm×85mm Power: 1000-3000W/unit Voltage: 220V±10%     Explosion-proof Temperature Controller Temperature Control Range: 0-120°C Explosion-proof Mark: ExdIIBT3 Protection Level: IP55 Voltage: 220V±10%     SBWK-3-(1-3) Type (Explosion-proof) Heater Dimensions: 600mm×(300-380)mm×85mm Power: 1000-3000W/unit Voltage: 220V±10% Structure: Integrated Temperature Control    Main Indicators: 1. Heating Equivalent: 860 kcal/kWh    2. Enclosed Heating Standard Usable Space: 15m³/kW 3. Temperature Control Range: 0-45°C               4. Cold Insulation Resistance: ≥10MΩ 5. Maximum Control Current: 15A               6. Power Frequency Impulse Voltage: 2kV for 1min 7. Power Frequency Withstand Voltage: 1200V (1min)         8. Continuous Working Time: ≥5000 hours Waterproof heaters are mainly used for heating in humid environments such as bathrooms and kitchens. Explosion-proof heaters are mainly used for heating in flammable environments such as chemical and petroleum industries.