Intelligent Conductivity Salt Density Tester

Published: 2020-08-18 14:58:02

Category: Salt Density Tester

Product Description

IntelligentConductivity Salt Density Tester

Recommended by Darui Electric

Product Introduction

The Conductivity Salt Density Tester (Digital Direct-Reading Intelligent Salt Density Tester) can be used to measure the equivalent salt deposit density (ESDD) on insulators, as well as the conductivity and temperature of solutions. This instrument is a dedicated measuring device for determining the equivalent salt deposit density (referred to as "salt density") on insulators, conforming to the standards and requirements of GB/T 16434-1996 "Environmental Pollution Classification and External Insulation Selection for High-Voltage Overhead Lines and Power Plants, Substations". The instrument is based on a microcontroller, achieving functions such as automatic range switching and automatic calibration of measurement gears. It features high measurement accuracy, wide range, intuitive readings, and portability.

◆Self-check of the system at startup, automatic calibration of the measurement system, large measurement range, accurate data, and fully automatic range switching.

◆Single-knob jog operation, Chinese prompts displayed during measurement, and backlit display for use in dim environments.

◆Built-in high-speed thermal printer for direct printing of measurement data.

◆Can store 100 sets of measurement data and upload to a computer for management.

◆Equipped with real-time clock function for effective data management.

◆Dual AC/DC power supply, built-in large-capacity lithium battery, fully charged can work continuously for about 10 hours (when printing function is not used).

◆Can measure the temperature of liquids, range: 0～95℃

◆Can measure the conductivity of liquids.

Salt density: 0.0001mg/cm2～9.9999mg/cm2 (based on X-4.5 insulator)

Temperature measurement: 0℃～100℃

Conductivity measurement: 0～100000μs/cm (standard configuration 1.0 electrode)

◆Basic error:

Salt density measurement: resolution 0.0001,

full-scale accuracy ±2%

Temperature measurement: resolution 0.1, accuracy ±0.5℃

Conductivity measurement: resolution 0.1μs/cm,

full-scale accuracy ±2%

◆Power supply: AC 220±10%

◆Ambient temperature: 0℃～50℃

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.

← Previous
Conductivity Salt Density Tester Next →
Insulator Salt Density Tester

Product Details

Intelligent Conductivity Salt Density Tester