Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

Molded Case Circuit Breaker M1-400L/3300

Published: 2020-08-15 15:15:00

Views: 2922

Category: 断路器

Product Description
Molded Case Circuit Breaker M1-400L/3300

 

Darui Electric recommends




Its design embodies the latest current-limiting principles and manufacturing technology, featuring compact structure, full modularization, high breaking capacity, and zero arc flash. Its rated insulation voltage is 750V, suitable for AC (50~60Hz), rated working voltage up to 690(800)V, and rated working current up to 630A in circuits for infrequent switching and infrequent starting of motors. The circuit breaker has overload, short-circuit, and undervoltage protection devices, which can protect lines and power supply equipment from damage.



According to the rated ultimate short-circuit breaking capacity (Icu), the circuit breaker is divided into Type D (economical), Type N (standard), and Type H (higher breaking capacity).



This circuit breaker can be installed vertically (i.e., upright) or horizontally (i.e., sideways). It cannot be reverse-fed, meaning only terminals 1, 3, 5 can connect to the power lines, and 2, 4, 6 to the load lines.



The circuit breaker is suitable for isolation, and the symbol is represented as “”



This circuit breaker complies with the following standards: IEC60947-1 and GB/T14048.1 General rules



IEC60947-2 and GB14048.2 Low-voltage circuit breakers



IEC60947-4 and GB14048.4 Contactors and motor starters



IEC60947-5.1 and GB14048.5 Electromechanical control circuit devices



Normal working environment



Altitude 2000 meters and below;



Ambient medium temperature not higher than +40°C and not lower than -5°C;



Able to withstand the influence of humid air, salt spray, oil mist, and mold;



In places without explosive media, and where there are no gases or conductive dust that can corrode metals and destroy insulation;



Places not subject to rain or snow;



Pollution degree 3;



Installation category III;



Classification of circuit breakers



Model and meaning of CXM2 series molded case circuit breakers



Some common models include:



CXM2-100D CXM2-100H CXM2-100N CXM2-160D CXM2-160H CXM2-160N



CXM2-250D CXM2-250H CXM2-250N CXM2-400D CXM2-400H CXM2-400N



CXM2-630D CXM2-630H CXM2-630N



Release methods and accessory codes



Release methods and accessory codes of CXM2 series molded case circuit breakers



Note: Among accessories for CXM1-100, 160, 250, there are no 260, 360, 460, 268, 368, 468.


WeChat QR Code
💬
💬 Message

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us