FDB-G Personal Safety Grounding Wire

Published: 2020-08-18 16:05:54

Category: Short-circuit grounding wire

Product Description

Dari Electric recommends

FDB-G Personal Safety Grounding Wire usage and maintenance:

Before using the personal safety wire, first verify that the power is off and confirm no voltage on the equipment. Then connect the grounding clamp to the grounding grid or flat iron, and use the grounding operating rod to tighten the wire end clamps onto the equipment conductors. When removing the short-circuit grounding wire, the sequence is exactly the reverse. The distance between the installed short-circuit grounding wire and live equipment, considering the swing of the grounding wire, should not be less than the new values specified in the "Safety Work Regulations for Electric Power". It is strictly forbidden to use winding methods instead of clamps for grounding short circuits. The portable short-circuit grounding wire should be properly stored. Before each use, carefully check that it is intact, the soft copper wire is not exposed, and the nuts are not loose; otherwise, do not use it. The inspection period for the portable short-circuit grounding wire is once every five years, with inspection items same as factory inspection. After a tested portable short-circuit grounding wire has been subjected to a short circuit, it should be judged based on the magnitude of the short-circuit current and visual inspection, and generally should be scrapped.Portable short-circuit grounding wire inspection period is once every five years, with inspection items same as factory inspection. After a tested portable short-circuit grounding wire has been subjected to a short circuit, it should be judged based on the magnitude of the short-circuit current and visual inspection, and generally should be scrapped.

FDB-G Personal Safety Grounding Wire notes:

1. Short-circuit grounding wires come in two categories: phase-separated and combined, with two types of wire end clamps: flat and hook. Please specify when ordering.

2. The cross-sectional area and length of the soft copper wire are matched according to the user's specific requirements.

3. When ordering, the wire specification range and voltage level must be specified.

4. The insulating operating rod is selected and matched according to user requirements.

5. Our factory is equipped with special grounding electrodes; users can choose as needed.

Note: The above information and technical parameters are compiled and released by Yangzhou Dari Electric Co., Ltd.

← Previous
High Voltage Grounding Wire Next →
35KVShort-circuit grounding wire

Product Details

FDB-G Personal Safety Grounding Wire