High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument Product Introduction
TPWHX-F High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument is applied to phase verification and phase sequence verification in power lines and substations. The instrument has functions such as phase verification, phase sequence measurement, and voltage detection. The wireless high voltage phase verification instrument meets (EMC) standard requirements, has strong anti-interference capability, and adapts to various electromagnetic field interference occasions. The measured high voltage phase signal is taken out by the collector, processed and directly transmitted, then received by the phase verification instrument host for phase comparison, and the result after phase verification is qualitatively determined. The high voltage phase verification instrument signal adopts wireless transmission, which is truly ***, fast and accurate, and adapts to various phase verification occasions.
High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument*Precautions
1. When testing on site with the High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument, operators should operate according to the high voltage testing *distance standard of the power department.
2. The voltage level of the *insulation rod tested by the High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument is ≤ 330KV.
High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument Product Features
1. Screen display content: Wireless high voltage phase verification instrument, different phase, same phase, frequency, X, Y.
2. Working power supply: The host uses a rechargeable power supply, and the X and Y collectors use 5 AG13 batteries.
3. Automatic shutdown: The host automatically shuts down about 8 minutes after power-on.
4. When contacting the measured strong electric field, the instrument will automatically alarm.
High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument Technical Indicators
1. Accuracy: Same phase error ≤15°, different phase error ≤15°
2. Sampling rate 3 times / second
3. X and Y collector power supply voltage is 7.5V ±1.5V
4. X and Y collector working current ≤4mA
5. The visual distance transmission distance between the host and X, Y collectors is X, Y≥25m, can penetrate walls, strong anti-interference capability
6. Working environment: -35°～ +50° Humidity: ≤95%RH
7. Storage environment: -40°～ +55° Humidity: ≤95%RH
8. The voltage level measured by the instrument is 0.38KV～110KV
High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument Composition
1. One aluminum alloy packaging box
2. One wireless high voltage phase verification instrument host
3. Calibration plug wire
4. One power charger
5. Two telescopic *insulation rods
6. One X and one Y collector each
7. 10 pieces of 1.5V batteries
*The insulation rod is made of epoxy resin, and the insulation rod is produced by a designated *factory. Its performance indicators fully comply with the national standard GB113398 and IEC60855 requirements.
Friendly reminder: When purchasing a High Voltage Wireless Phase Verification Instrument | Wireless High Voltage Phase Verification Instrument, choose products from direct manufacturers to ensure product quality and after-sales service!
