|
WHX-II High Voltage Wireless Phase Verifier |
This instrument uses wireless transmission technology, can be used through walls, breaking through the safety hazards and limitations of conventional instruments. It has a wide voltage testing range, and is safe, convenient, and accurate to operate. It is currently the most ideal instrument for phase verification.
Components
The WHX-I wireless phase verifier consists of transmitters No.1 and No.2, a receiver, and an insulating rod.
When in use, contact the signal transmitter No.1 with the original end, and place transmitter No.2 at the tested end. Press the test button on the receiver, and it will compare the two signals. When they are in phase, it displays two identical starting waveforms, with text, light, and sound prompts.
Technical Specifications
Wireless transmission capability is ≤10 meters, can penetrate walls, and has strong anti-interference ability.
The receiver has waveform phase angle difference and battery level display.
Phase angle difference less than ±20° is considered in phase, greater than ±20° is out of phase.
Wide applicable voltage range: 6KV-35KV universal.
Transmitter: power 8.4V, size 60×120mm
Receiver: power 10.8V, size 235×130×43mm
The insulating rod is made of epoxy resin, produced by a designated professional factory, and its performance indicators fully comply with the requirements of national standard GB113398-92 and IEC60855.
.jpg)
