Overview;
For years, testing or maintenance of electrical equipment that cannot be directly contacted required operators to climb to high places for wiring, which was labor-intensive and unsafe. To solve this technical challenge, our company's engineering and technical personnel, with the strong support and assistance of on-site staff in the power system,
after research, exploration, and repeated experiments, successfully developed a dedicated multifunctional high-altitude wiring clamp suitable for field use. The multifunctional high-altitude wiring clamp is mainly used for substation maintenance in the power system, for high-altitude electrical testing such as contact resistance, loop resistance, relay protection CT tests, etc., especially suitable for testing and wiring high-altitude equipment from the ground. It can select any position that can be clamped for testing and can adapt to wiring needs at different angles. The advent of the multifunctional high-altitude wiring clamp has shifted traditional high-altitude work to the ground, fundamentally solving the dangers of climbing.
Features;
1. Simple operation: It brings traditional high-altitude work to the ground. By pushing and pulling the dedicated operating rod, the clamp jaws can freely open and close to complete wiring. Safe and reliable: The wiring clamp has a clamping force locking and release device inside. When pulling the dedicated rod, the internal spring energy storage device can automatically lock the jaws at any required clamping force, and they will not loosen or open by themselves under non-operating conditions.
2.High clamping force: It can easily break the oxide film at the test point. The moving and fixed jaws use the principle of a movable pulley to save effort, using a smaller pulling force to obtain a larger clamping force; Strong overload capacity: Short-term current capacity greater than 200A.
3.Good contact: The wiring clamp has the function of overcoming the oxide film while clamping, ensuring good contact between the jaws and the wiring position.
4.Strong practicality: The jaw angle of the wiring clamp can be adjusted, enabling wiring for tests or maintenance grounding such as loop resistance, DC resistance, dielectric loss, insulation withstand voltage, etc., at different angles, thicknesses, diameters, and heights below 8.5 meters. Lightweight and easy to use. Reasonable structural design, fine quality, durable, with the clamp head weighing less than 1kg.
