Insulating Boots (Gloves) Withstand Voltage Test Device

Technical Parameters:

1. Input Voltage: AC220V/50Hz

2. Capacity: 3kVA

3. High Voltage: 0～30kV

4. High Voltage Current: 0～100mA

5. Test Quantity: 6 pieces each time

6. Measurement Data: Can display and print the voltage value of each tested object; leakage current value 7. Overcurrent protection; overvoltage protection; custom time, voltage, leakage current value 8. LCD display, full Chinese menu operation, with printing 9. Measurement Accuracy: Voltage ±2% (±3 digits) Current ±2% (±3 digits) 10. Weight: Insulating boots (gloves) operation box 12kg, power frequency withstand voltage test bench 60kg

Performance Features:

The Insulating Boots (Gloves) Withstand Voltage Test Device developed by our company complies with the requirements of the "Preventive Test Regulations for Electric Power Safety Tools and Equipment" (State Power Development [2002] No. 777) issued by the State Power Corporation, and conforms to the "Regulations" for intelligent insulation preventive tests of insulating boots and insulating gloves. It is widely used in power supply, power generation and other electric power enterprises.

◎ The equipment consists of two parts: high-voltage test device and data processing device.

◎ Insulating Boots (Gloves) Withstand Voltage Test Device has complete items. It can conduct intelligent insulation performance preventive tests for insulating boots, high-voltage insulating gloves, and low-voltage insulating gloves.

◎ It can set parameters by itself for leakage current measurement tests of other products.

◎ The test process is controlled by microcomputer, and voltage boosting and reducing are completed automatically.

◎ High and low voltage are isolated, safe and reliable.

◎ Chinese menu display, man-machine dialogue operation, easy to operate.

◎ Up to 6 test pieces can be tested at the same time, improving work efficiency.

◎ Automatically print test reports.

Usage Method:

1. After unpacking, fix the insulating boots (gloves) withstand voltage test device and connect the grounding wire properly.

2. Before the test, fill the tested object with steel balls, then adjust the electrode rod through the locking screw so that the electrode is inserted into the insulating boots (gloves) and adjust the screw to contact the steel ball surface.

3. Remote control key "1" is the stop key, "2" is the start key, "3" is the boost key, "4" is the buck key, "5" is the timing key, and "6" is the spare key.

4. Connect the power cord, turn on the air switch, and the power indicator light will be on.Press the "2" key, the high-voltage indicator light will be on. If it does not light up, it means the voltage regulator has not returned to zero. Please press the "4" key to reduce voltage, then press the "2" key, and then press the "3" key to boost voltage. When the required voltage is reached, press the "5" key to start timing. When the time is up, the buzzer will sound. Press the "4" key to return the voltage regulator to zero, and press the "1" key to end the test.

5. From the left, the first meter is the high-voltage meter (KV), and the following six meters are digital ammeters (mA). The corresponding indicator lights above the six meters (mA) are overcurrent indicator lights, corresponding one by one.