Product Introduction
The TPJYX-B Insulation Boots (Gloves) Withstand Voltage Test Device is based on the principle of electromagnetic induction, changing the input voltage to reach the maximum voltage required for the test.
The TPJYX-B Insulation Boots (Gloves) Withstand Voltage Test Device consists of two parts: a water tank and a control console. The water tank is divided into upper and lower sections. The upper section has 6 small water tanks, and the lower section houses the test transformer, allowing for withstand voltage tests on 6 insulation boots or 6 insulation gloves at a time. It simultaneously displays the leakage current of the insulation boots or gloves. The control console is equipped with overcurrent protection, zero-position protection, time protection, and alarm functions.
Environmental Conditions
1. Ambient temperature: 0～40℃
2. Relative humidity: ﹤85% (when air temperature is 25℃)
3. Altitude: ﹤1000m
4. Input power supply harmonic content: ﹤3%
Technical Parameters
1. Working power supply: AC220V±10% 50Hz
2. Input voltage: 220V
3. Input current: 15A
4. Capacity: 3KVA
5. Output voltage: 0～25KV
6. Output current: 120mA
_jpg113.jpg)
