Product Detailed Introduction
The DLKG high and low voltage switchgear power-on test bench is used by high and low voltage switchgear manufacturers to conduct various power-on tests before delivery. It can provide various AC and DC power supplies, facilitating the testing of switchgear and improving work efficiency.
High and low voltage switchgear test bench, switchgear power-on test bench, switchgear test, switchgear type test bench, high voltage switchgear test bench, low voltage switchgear test bench
1. Provide various AC and DC power supplies;
2. Convenient for testing switchgear;
3. Helpful to improve work efficiency.
Operating environment:
Temperature: -10~45℃ Humidity: ≤85%
Altitude: ≤1000m
The place of use should be free of gases that seriously affect insulation, chemical dust, and other explosive and corrosive media.
There should be a good grounding device.
Model Input Power Supply Output Power Supply Dimensions (mm) Weight (kg)
DLKG
Basic Type
Three-phase four-wire
AC 380V 50Hz
(Terminal form)
1. Single-phase AC 220V output (fixed value, socket or two-hole terminal form) Two groups
2. Three-phase AC 380V output (fixed value, socket or three-hole terminal form) One group
3. Three-phase AC 100V output (fixed value, three-hole terminal form) One group
4. AC operating voltage output AC 0~400V (three-hole terminal form) One group
5. AC current output three-phase AC 0~10A (three-hole terminal form) One group
6. DC operating voltage output DC 0~260V (three-hole terminal form) One group 650×750×800 45
DLKG-II
DC multi-gear output Same as above Parameters same as basic type
Add item 7:
7. DC fixed multi-gear output DC 24V 36V 110V 220V One group 650×750×800 50
DLKG-III
Capacitor cabinet switching test Same as above
Parameters same as basic type
Item 4 increases capacity current:
4. AC operating voltage output AC 0~400V, at 220V ≥30A One group 650×750×800 60
DLKG-IV
DC closing power supply Same as above
Parameters same as basic type
Add item 7:
7. DC closing DLKG-300A power supply (6-hole thyristor adjustment) output DC 0～300V
(Rated current 100A, short-time working current 300A) One group 650×750×800 70
DLKG-V Ultimate Edition
Withstand voltage function Same as above
In addition to the functions of DLKG basic type, type II, and type IV
9. Integrated 0~5kV high voltage output function including overcurrent protection, timing function and other control units 650×750×800 90
DLKG-X Customized Version Same as above
A. DC fixed multi-gear output DC 24V 36V 110V 220V
B. DC closing DLKG-300A power supply (6-hole thyristor adjustment) output DC 0～300V
(Rated current 100A, short-time working current 300A)
C. AC withstand voltage 0~3kV/0~5kV withstand voltage 1-99 time automatic instantaneous boost (DL-5KV 3C withstand voltage tester | power frequency withstand voltage detector | electrical appliance withstand voltage tester)
D. Ground resistance measurement: 4~30A current 6V voltage 1~500mΩ range 1~99s time (DL-10A 3C ground resistance tester)
E. Range phase voltage, line voltage detection Uan Ubn Ucn Uab Ubc Uca off 7 gears
