WHX-II Wireless Phase Detector
Darui Electric recommends:
WHX-II Wireless Phase Detector, also known as WHX-II Wireless Phase Detector, WHX-II HV Wireless Phase Detector.
Instrument Introduction
Used for phase verification and phase sequence checking in power lines and substations, with functions including phase detection, phase sequence measurement, and voltage verification. It features strong anti-interference capability, complying with EMC standards, and is suitable for various electromagnetic interference environments. The measured high-voltage phase signal is extracted by the collector, processed, and then transmitted directly. The phase detector receives and compares the phases, and locates the results after phase verification. This product is safe, reliable, stable in performance, and easy to operate, making it an ideal phase detection instrument.
Details
Display
Wireless HV Phase Detector, Out-of-phase, In-phase, X, Y
Power
Main unit uses 1x battery (NEDA/604/6F22) or equivalent. X and Y collectors each use 5x AG13 batteries.
Auto Power-off
Main unit automatically shuts off approximately 15 minutes after startup.
Backlight
During phase detection, if the light is too dim making it difficult to read data, press the backlight switch.
Technical Parameters
Voltage Rating: 0.38kV~220kV
Main Unit Power: 9V ±2V
Collector Power: 7.5V ±1.5V
Host and X/Y Collector Transmission Distance: X≥80m Y≥50m
Operating Environment: -35℃~+50℃ Humidity: ≤95%RH
Storage Environment: -40℃~+55℃ Humidity: ≤95%RH
Insulated Telescopic Rod: 600mm (retracted) / 3200mm (extended)
Case Dimensions (L×W×H): 650mm×250mm×100mm
Total Weight: 5kg
Note: The above information and technical parameters are compiled and published by Yangzhou Darui Electric Co., Ltd.
