Supply of top-mounted angle-type electric heater SRY5. 1. Application: This electric heater is mainly used for heating media in hydraulic lubrication systems, and can also be used for heating non-corrosive gases. 2. Features: 1) This heater is a top-mounted angle-type electric heater that can be installed on the top plate of oil tanks and containers, making installation, inspection, and replacement convenient. It is safer and more reliable than those installed inside the tank, eliminating oil leakage issues caused by connecting flanges and gaskets. The heater can be replaced without draining the oil tank, saving maintenance space required for side-mounted heaters. 2) The A dimension of the heater can be customized as needed. Various surface load specifications are available, and proper selection can prevent oil carbonization and burning, ensuring safety and reliability and extending media life. SRY5-1 has a mounting hole of Φ65, SRY5-11 has Φ90, and SRY5-111 has Φ120. A and B dimensions can be customized according to the application environment. 3) Special voltage and power heaters can be produced per customer requirements, and temperature control devices can be added as needed. 4) SRY5-1 has high surface load and is not suitable for heating in paint; for oil heating, SRY5-11 and SRY5-111 are recommended. 3. Main technical parameters: 1) Metal tubular heating element: Rated voltage: 220V, 380V; Maximum allowable tube temperature: 170℃-400℃; Heated media: minerals, water; Power: 1-6KW; Surface load: 4.4W/cm², 1.2W/cm², 0.7W/cm². 2) Heating tube length in media: SRY5-1: surface load 3.1W/cm²: 430-1300mm; 4.4W/cm²: 300-900mm. SRY5-11: 1.2W/cm²: 280-1660mm; 4.4W/cm²: 500-2850mm. SRY5-111: 1.2W/cm²: 370-2210mm; 4.4W/cm²: 630-3780mm. SRY5-11[HRY13] technical parameters and dimensions: Model/Power: 1-6KW; Voltage: 380/220V; Heating zone B: 370-2210mm; Flange dimensions: Φ1=150, Φ2=120, Φ3=90, n-Φ4=4-Φ11. SRY5-111[HRY10] technical parameters and dimensions: Tube Φ=16mm; Surface load 0.7W/cm²; Power 1-6KW; Voltage 380/220V; B: 500-2850mm; Flange: Φ1=200, Φ2=170, Φ3=120, n-Φ4=16-9. SRY5-111[HRY11] technical parameters and dimensions: Tube Φ=16mm; Surface load 1.2W/cm²; Power 1-6KW; Voltage 380/220V; B: 208-1660mm; Flange: Φ1=200, Φ2=170, Φ3=120, n-Φ4=16-9.
